Mobile Home Skirting Installation Cost Guide
Updated September 2026
This page is for homeowners researching the job. TrailerHomeLeads does not perform this work. We build pages like this onto contractor websites and we sell related leads to licensed crews.
Skirting installation cost is quoted by the perimeter, the material and the condition of the ground around the home. This is what sits inside the number.
The short answer
Skirting installation cost is driven by the perimeter length of the home, the material chosen, how much preparation the ground around the home needs, and whether ventilation and an access panel are included. Removal and disposal of old skirting is a separate line and is commonly left out of a cheap quote.
What the number is made of
Skirting installation typically averages $6 to $8 per linear foot across materials, supplied and installed, per national cost data. Vinyl sits at the low end; insulated and masonry systems run higher. This is the figure the page is searched for and it needs a source before the page is promoted.
What is knowable without the figure is the structure of the quote, and that is what lets a homeowner compare two numbers properly.
Swipe the table sideways to see every column.
| Line | What it covers | Often excluded? |
|---|---|---|
| Material | Panels, rails and trim | No |
| Labour | Setting the rail, cutting and fitting the run | No |
| Removal | Taking out and disposing of old skirting | Yes |
| Ground preparation | Levelling and grading the perimeter | Yes |
| Ventilation | Vent panels to the local requirement | Sometimes |
| Access panel | A usable opening into the crawl space | Sometimes |
| Insulation | Insulated panel instead of plain | Yes, priced as an upgrade |
What makes a quote go up
A longer perimeter, an uneven or sloping ground line, heavier material, and a home that needs the old skirting taken away. Sloping ground is the one homeowners underestimate most, because every panel on that run has to be cut to fit.
Multi section homes have more perimeter than people expect, and a home with a porch, an addition or steps has more cuts and more trim than a plain rectangle.
- Measure the perimeter. The single biggest driver, and easy to do yourself before you call.
- Decide the material. Vinyl, metal, insulated panel or masonry, named explicitly.
- Check the ground. Slope and unevenness add cutting and time.
- Ask about removal. Old skirting disposal is a real cost and a common exclusion.
- Specify vents and access. Both belong in the quote, not in a change order.
Comparing quotes without getting caught
Get every quote to price the same material, the same ventilation, the same access panel, the same ground preparation and the same removal. Once those match, the cheapest is genuinely cheapest.
For material choice first, read the cornerstone skirting guide, which covers what each option is good and bad at.
How home size sets the baseline skirting installation cost
Skirting is measured work: the perimeter in linear feet multiplied by the panel height is the material, and the same two numbers drive the labour. A long multi section home on a tall set simply contains more skirting than a short single wide sitting low, and no quote escapes that arithmetic.
This is why phone estimates without measurements are near worthless for skirting installation cost. Measure the perimeter and the tallest ground to siding height before calling, hand every bidder the same figures, and the quotes that come back will finally be about material and workmanship rather than about who guessed your home’s size most generously.
For a bracket before you measure: national cost data puts a single wide skirting installation at $1,000 to $2,500 and a double wide at $2,000 to $4,000, while Angi’s 2026 skirting cost data reports an average finished job of $2,400 across a $500 to $7,700 spread. Those are ranges, not quotes. Your own perimeter and panel height decide where inside them you land.
The same data puts skirting material at $6 to $8 per linear foot, with a typical single wide needing about 150 linear feet of it, and labour at $60 to $125 per hour, which is roughly 60 percent of a finished job. Two line items that get quoted separately more often than not: removing and disposing of old skirting at $200 to $500, and foundation vents at $7 to $25 each.
Swipe the table sideways to see every column.
| Material | Single wide | Double wide |
|---|---|---|
| Vinyl | $1,000 to $1,500 | $1,400 to $3,000 |
| Insulated vinyl | $1,500 to $3,000 | $2,500 to $4,500 |
| Faux stone | $1,500 to $2,500 | $2,000 to $4,000 |
| Faux brick | $1,300 to $2,500 | $2,000 to $4,000 |
| Brick or concrete | $2,000 to $4,000 | $3,500 to $6,000 |
| Timber | $1,500 to $2,500 | $2,500 to $5,000 |
| Timber lattice | $500 to $700 | $600 to $800 |
Figures above from HomeGuide’s 2026 skirting installation cost data, checked September 2026. Treat them as the shape of the market, not as a quote for your home.
Where the material choice moves the number
Any figure you see online for skirting installation cost is someone else’s perimeter, someone else’s panel and someone else’s ground. The table is the set of questions that turns your own quote into a number you can trust.
Swipe the table sideways to see every column.
| Line on the quote | What pushes it up | What keeps it honest |
|---|---|---|
| Panels | Heavier, insulated or masonry look product | Material named exactly, per foot, on the quote |
| Rails and track | Replacing rusted or heaved framing from the old run | Reuse assessed on site, not assumed either way |
| Vents and doors | More penetrations, larger access door | Count stated rather than bundled |
| Old skirting | Removal and disposal of the existing run | Included or excluded in writing |
| Site | Slope, soft ground, obstructions at the line | Priced after photos or a visit, not discovered on the day |
Paying for installation versus doing it yourself
Vinyl skirting sits inside a capable owner’s reach, and doing it yourself trades a weekend and some tool buying for the labour line. The honest accounting includes the extras the pro price quietly carries: delivery, waste from miscuts, the odd replacement panel, and the value of a straight line the first time.
Professional installation earns its money fastest on tall sets, sloped lots, heavy materials and homes under park deadlines, where the crew’s jigs and repetition show. Many homeowners split the difference: pay for the measured, straight rail and track work, then hang and trim panels themselves. Ask whether an installer will quote it that way.
Getting the number down without getting less skirting
There are honest ways to lower a skirting installation cost and one dishonest one. The dishonest one is thinning the spec, fewer vents, no ground prep, reused rusted rails, which converts money saved now into repairs bought later. The honest ones cost only effort.
Timing is the biggest lever most owners never pull: crews quote sharper in their slow season than in the weeks after a storm has filled every calendar in the county.
- Do the measuring and clearing. Accurate figures and a clear line around the home remove padding from the quote.
- Be flexible on dates. A job that fills a gap in the schedule earns a gap price.
- Take three complete quotes. Same spec to each bidder; the spread is negotiation material.
- Split the job where offered. Rails and track professionally set, panels hung yourself, where an installer will quote it that way.
Do you install skirting or underpinning?
This page is the kind of guide we build into a skirting installer’s own site: material pages for vinyl and metal, an underpinning page that catches the other search term, and a cost page that qualifies the caller before you pick up. Live in two weeks.
Related guides
Common questions
- How much does skirting installation cost?
- Typically $6 to $8 per linear foot on average, per national cost data. It is priced by perimeter length, material, ground preparation and whether removal, ventilation and an access panel are included.
- Is removal of old skirting included?
- Usually not. Removal and disposal is one of the most common exclusions on a low quote, and it is a real cost.
- Does sloping ground cost more?
- Yes, noticeably. Every panel on a sloped run has to be cut to fit, which is labour rather than material.
- Is insulated skirting worth the extra?
- In a cold climate, usually, because the alternative cost is frozen pipes and colder floors. In a mild one it is a comfort upgrade rather than a necessity.
- Can I supply the material myself?
- Some installers allow it and some will not warrant work on material they did not supply. Ask before you buy anything.
- Who should quote it?
- A skirting installer who prices material, labour, removal, ground prep, venting and access as separate lines. If that is your trade, see the skirting website offer.
- Is skirting installation cost charged per foot?
- Mostly, yes: material by the linear foot at your panel height, labour by the footage with the site’s difficulty priced in. That is why measured figures beat averages, and why the fastest way to a real number is handing every bidder your own perimeter and tallest height.
- Does insulated skirting change the installation cost much?
- The material steps up in price and the panels handle differently, but the labour shape of the job stays similar. Whether the step is worth it is a climate question: homes with freeze prone plumbing or year round occupancy in cold regions have the strongest case for paying it.
- What time of year is skirting installation cheapest?
- Crews quote sharpest when their calendar is quiet, and quietest is usually outside the weeks after storms and outside each region’s rush ahead of winter. Flexible dates are worth stating when you ask for the quote; a job that can fill a gap in the schedule often earns a gap price.
- Do skirting quotes include the vents and access door?
- They should, itemised, because ventilation and access are part of the enclosure, not extras. A quote silent on both is either incomplete or planning to improvise on the day. Ask for the count in writing; it is a one line question that sorts bidders fast.